|
|
Getting back to work, I primed the glare shield and then painted it black. Next you mount the canopy back in position and mark out the area to be fiberglassed to hold the front edge to the frame. You make a small tool, and measure off a two inch area centered on the edge. You will make a four inch radius fillet in the are between the bottom of the red tape and the red line. Outside of that area the shape will change as you sand to a fair line to meet the side vertically. But first you do an initial sanding for a small fillet that will simply fill in the tiny gap between the edge of the canopy and the aluminum.
|
