Click a photo to embiggen

When the axles go on, you have to measure for toe in or toe out. Ideal is no toe in or out, however as long as they are less than half a degree toe in and not toe out at all, no shim plate adjustment is needed. Mine are fine, with no adjustment needed.

Since the axles are OK, I could put the wheel and brakes on. Then let the fuselage down on the gear. I don’t have a good picture of that yet as I have too much stuff in the way to get a good picture, but it is down on the ground.

On to the engine (after more than a few clean up tasks)